• This topic has 9 voices and 10 replies.
Viewing 12 posts - 1 through 12 (of 12 total)
  • Author
    Posts
  • #25877
    jaylamoon
    Member

    Can anyone recomend a good frame painter? it needs blasting too!

    #38063
    RaidenHayden
    Member

    Auto body shop. or custom cycle shops. Go for pwoder coating if you can find someone. The guy that did mine isn’t around anymore

    #38064
    bigjeff
    Member

    I dont know where you are coming from but there is a good powdercoating place in Manchester on 37.

    #38065
    BIGANT-DOG
    Member

    Try to find someone that does bikes. If you havea euro b.b. you do not want to have to scrape the paint out of the threads.

    #38066
    BIGANT-DOG
    Member

    Where is this place jeff i want to get mine done but was gonna send it out.

    #38070
    BrianP
    Member

    c-4 labs in DE

    chip bowers is the owner and bike enthusiast he only does bikes

    a2002corvette@aol.com

    http://www.c4labspc.com/

    #38081
    anthony
    Member

    Johnson’s Powder Coating,Elbo Lane,Burlington NJ,there right down the road from andy’s(chip n dale’s)shop in Mt Holly.

    #38090
    s4lnj
    Member

    if you get stuck let me know– i paint cars and have done quite a few bikes– they don’t take all that much time and i can usually use left over stuff from an automotive job. i can also blast it too. BUT– powder coating is a much tougher finish than automotive paints. basecoat/clearcoat is tough, but not made to withstand the beating that some bikes go through. depends on what kind of rider/riding.

    ant dog that goes for you too– but don’t think that i’ll be taking trades for one left crank arm or a half used grip!!!!! got that TBG?

    dave

    #38091
    BIGANT-DOG
    Member

    That one left crank arm got me a set of suzue sealed hubs!

    #38093
    BrianP
    Member

    here is what that crank arm was the finishing touch for

    thanks again ant…… and BTW, the paint on that was done by c-4 labs

    #38153
    CrazyCraig
    Member

    That has got to be one of the sweetest old school rides I have seen.

    #38155
    bmiddaugh
    Member

    I feel like Brian needs his own section on the site here just for what he does with these classic rides!

Viewing 12 posts - 1 through 12 (of 12 total)
  • You must be logged in to reply to this topic.