- This topic has 9 voices and 10 replies.
-
Posts
-
Can anyone recomend a good frame painter? it needs blasting too!
Auto body shop. or custom cycle shops. Go for pwoder coating if you can find someone. The guy that did mine isn’t around anymore
I dont know where you are coming from but there is a good powdercoating place in Manchester on 37.
Try to find someone that does bikes. If you havea euro b.b. you do not want to have to scrape the paint out of the threads.
Where is this place jeff i want to get mine done but was gonna send it out.
c-4 labs in DE
chip bowers is the owner and bike enthusiast he only does bikes
Johnson’s Powder Coating,Elbo Lane,Burlington NJ,there right down the road from andy’s(chip n dale’s)shop in Mt Holly.
if you get stuck let me know– i paint cars and have done quite a few bikes– they don’t take all that much time and i can usually use left over stuff from an automotive job. i can also blast it too. BUT– powder coating is a much tougher finish than automotive paints. basecoat/clearcoat is tough, but not made to withstand the beating that some bikes go through. depends on what kind of rider/riding.
ant dog that goes for you too– but don’t think that i’ll be taking trades for one left crank arm or a half used grip!!!!! got that TBG?
dave
That one left crank arm got me a set of suzue sealed hubs!
here is what that crank arm was the finishing touch for
thanks again ant…… and BTW, the paint on that was done by c-4 labs
That has got to be one of the sweetest old school rides I have seen.
I feel like Brian needs his own section on the site here just for what he does with these classic rides!
- You must be logged in to reply to this topic.